Supero PDSLM, User Manual

Page: 37 / 81

Chapter 2: Installation
2-21
PDSLM
2-6 Connecting Cables
This section provides brief descriptions and pin-out defi nitions for onboard headers
and connectors. Be sure to use the correct cable for each header or connector.
• For information on FP USB (USB 2/3), please see Page 2-13.
• For information on COM-A Port and COM-B Port, please see Page 2-12.
Main Power Connector
The 12V 4-pin main power supply connec-
tor located at J11 provides power supply
for use of the motherboard. See the table
on the right for pin defi nitions. (See Notes
below.)
External Power Connector
In addition to the 4-pin main power connec-
tor, which supplies power needed for the
motherboard (above), the other 4-pin Exter-
nal Power connector at J5 is used to provide
power to external removable devices such
as HDD, SATA and CD-ROM Devices. This
power connector supports 12V and 5V de-
vices. (See Notes below.)
12V 4-Pin External
Power Connector (J5)
Pin Defi nitions
Pin Defi nition
1 +12V
2 Ground 1
3 Ground 2
4 +5V
A. 4-Pin Main PWR
B. 4-Pin External PWR
A
B
12V 4-Pin Main Power
Connector (J11)
Pin Defi nitions
Pins Defi nition
1 & 2 Ground
3 & 4 +12VSB
Note: To power on the system, please short Pin 14 (the green wire) and Pin 15 (the
black wire) of the 12V 20-Pin ATX power connector or Pin 16 (the green wire) and Pin
17 (the black wire) of the 12V 24-Pin ATX power connector fi rst. For system stability,
please use 4-pin 12V PWR cables that can supply at least 13A current.
Required Connection
Required Connection