Supero PDSLM, User Manual

Page: 18 / 81

2-2
PDSLM User's Manual
When handling the processor package, avoid placing
direct pressure on the label area of the fan.
Notes:
1. Always connect the power cord last and always remove it before adding, removing
or changing any hardware components. Make sure that you install the processor
into the CPU socket before you install the CPU heatsink.
2. Intel's mPGA478M CPU package contains the CPU fan and heatsink assembly.
If you buy a CPU separately, make sure that you use only the Intel-certifi ed multi-
directional heatsink and fan.
3. Refer to the MB Features Section for more details on CPU support.
Tools Needed:
1. a Phillip 1 screwdriver as shown on the right
2. a Flathead screwdriver
mPGA478M CPU Assembly Kit:
The CPU Package includes the following:
1. Heatsink Bracket
2. mPGA 478 CPU
3. CPU Passive Heatsink
4. CPU Fan
5. CPU Fan Cable
CPU Installation
Installing the Heatsink Bracket
Before installing the CPU on the motherboard, you need to install the heatsink
bracket on the reverse side of the motherboard. Follow the steps below to install
the heatsink bracket on the back of the motherboard.
2-2 Processor/Heatsink Installation and Removal
1. Locate the four heatsink mounting
holes on the reverse side of the moth-
erboard and four heatsink lock align-
ments on the heatsink bracket.
2. Align the four bracket lock align-
ments on the heatsink bracket against
the four mounting holes on the back of
the motherboard.
Phillip 1 Screwdriver
1
2
3
4
5
Heatsink Mounting
Holes (4) on the MB
Bracket Lock Alignments
(4) on the Bracket