Supero PDSLM, User Manual

Page: 22 / 81

2-6
PDSLM User's Manual
PDSLM
2-3 Mounting the Motherboard in the Chassis
All motherboards have standard mounting holes to fi t different types of chassis.
Make sure that the locations of all mounting holes for the motherboard and the chas-
sis match. Although a chassis may have both plastic and metal mounting fasteners,
metal ones are highly recommended because they ground the motherboard to the
chassis. Make sure that the metal standoffs click in or are screwed in tightly. Then
use a screwdriver to secure the motherboard onto the motherboard tray. (See the
layout on the right for mounting hole locations.)
Note : Some components are very close to the mounting holes.Please take all neces-
sary precautionary measures to avoid damaging these components when installing
the motherboard into the chassis.
Tools Needed:
1. Philip Screwdrive
2. (4) Panhead #6 screws
Installation Instructions:
1. Locate the mounting holes on the motherboard.
Refer to the layout on the right for mounting hole
locations.
2. Locate the matching mounting holes on the chassis.
Align the mounting holes on the motherboard against
the mounting holes on the chassis.
3. Place Standoffs on the chassis as needed.
4. Insert a Panhead #6 screw into a mounting hole on
the motherboard and its matching mounting hole on
the chass, using a Philip screwdriver.
5. Repeat Step 4 to insert #6 screws to all mounting
holes.
6. Make sure that the motherboard is securely placed
on the chassis.
Locations of Mounting Holes