Chapter 7: BIOS
7-13
Set LAN Confi guration
IP Address
Shows the IP address confi guration.
MAC Address
Shows the MAC address confi guration.
Subnet Mask
Shows the subnet mask confi guration.
Set PEF Confi guration
Enable or
Disable
PEF support. If Enabled, the following PEF settings will
appear.
PEF Action Global Control
Use this setting to determine the type of PEF action. Options are
Alert
,
Power Down, Reset Sysytem, Power Cycles, OEM Action and Diagnostics
Int.
Alert Startup Delay
This setting allows you to Enable or
Disable
a delay for the alert startup. If
Enabled, the following settings will appear.
Startup Delay
This setting allows you to Enable or
Disable
a delay for the alert startup. If
Enabled, the following settings will appear.
Event Message for PEF Action
This setting allows you to Enable or
Disable
events messages for a PEF
action.
CBMC Watch Dog Timer Action
Use this to determine how the Watch Dog funtion will act. Options are
Disabled
,
Reset System, Power Down and Power Cycle.
Summary of Contents for Dual Processor AS 1020C-3
