Supero Dual Processor AS 1020C-3, User Manual

Page: 86 / 106

7-12
AS1020C-3 User's Manual
Terminal Type
This item allows you to select the terminal type for console redirection. The options
are ANSI , VT100, and VT-UTF8.
VT-UTF8 Combo Key Support
This item allows you to Enable or Disable VT-UTF8 combo key support.
Sredir Memory Display Delay
This item allows you to set the redirect delay to No Delay , Delay 1 sec., Delay 2
sec. or Delay 4 sec.
System Health Monitor
This opens a submenu that lists the temperature(s) of the CPU(s), system tem-
perature, and the voltage levels for CPU1VCore, CPU2VCore, CPU1DIMMVolt,
CPU2DIMMVolt, 1.2V for Hyper-Transport, 1.5V, 2.5V, 3.3V Vcc, 3.3VSB, 5Vin,
12Vin, -12V Vcc and battery voltage. There is one BIOS setting in this submenu:
System Fan Monitor
This feature allows the user to determine how the system will control the speed of
the onboard fans. If the option is set to "3-pin server", the fan speed is controlled
based upon the CPU die temperature. When the CPU die temperature is higher,
the fan speed will be higher as well. Select Disable to disable the fan speed control
function, which allows the onboard fans to continuously run at full speed (12V). The
options are 1) Disable, Full Speed and 2) Server mode.
FAN1 Speed through FAN5 Speed
The speeds of the onboard fans (in rpm) are displayed here.
IPMI 1.5 Confi guration
View BMC Status Event Log
Highlight this and press the Enter key to view the BMC Status Event Log.
Clear BMC Status Event Log
Use this option to clear the BMC Status Event Log.