Supero C2SBM-Q, User Manual

Page: 64 / 95

4-12
C2SBM-Q User's Manual
Default Primary Video Adapter
This feature allows the user to select the video device used by the BIOS during
POST. If set to
Auto , PEG, PCI, IGD (Internal Graphics Device) devices will be
selected. If set to IGD (Internal Graphics Device), IGD and PCI devices will be
selected. If set to PEG, PEG and PCI devices will be selected. If set to PCI, PCI,
PEG and IGD devices will be selected.
IGD-Device 2
This feature allows the user to enable or disable Internal Graphics Device#2 by
entering a specified value.
IGD-Device 2, Function 1
This feature allows the user to enable or disable Function#1 of Internal Graphics
Device#2 by entering a specified value.
DVMT 4.0 Mode
This feature allows the user to configure the DVMT 4.0 Graphics Memory to be used
by the Internal Graphics Device. The options are Fixed, DVMT and Auto.
Pre-allocated Memory Size
This feature allows the user to set the total amount of Pre-allocated graphics memory
to be used by the Internal Graphics Device. The options are
1 MB and 8 MB.
IGD Memory Size
This feature allows the user to set the total amount of graphics memory to be used by
the Internal Graphics Device. The settings are 128 MB,
256 MB and MAXDVMT.
Fixed Graphics Memory
This feature allows the user to display the Fixed Graphics settings.
DVMT Graphics Memory
This feature allows the user to display the DVMT Graphics settings.
Azalia Audio
Select Auto to enable Azalia Audio. The settings are Auto and Disabled.
Route Port 80h Cycles to
This feature allows the user to decide which bus to send debug information to. The
options are Disabled,
PCI and LPC.