Supero C2SBM-Q, User Manual

Page: 60 / 95

4-8
C2SBM-Q User's Manual
ACPI Sleep Mode
Use the setting to determine if you want to use the ACPI (Advanced Configuration
and Power Interface) power management on your system when the system enter
into the sleep mode. The options are
S1, S3 and S1S3.
High Precision Event Timer
Select Yes to activate the High Precision Event Timer (HPET), which is capable of
producing periodic interrupts at a much higher frequency than a Real-time Clock
(RTC) can in synchronizing multimedia streams, providing smooth playback and
reducing the dependency on other timestamp calculation devices, such as an x86
RDTSC Instruction embedded in a CPU. The High Precision Event Timer is used
to replace the 8254 Programmable Interval Timer. The default setting is
No
.
Power Button Behavior
If set to Instant-Off , the system will power on or power off immediately as soon
as the user hits the power button. The options are Instant-Off and 4-second
Override.
Resume On Modem Ring
Select On to “wake your system up” when an incoming call is received by your
modem. The options are On and
Off .
Resume On PME#
Select On to “wake your system up” from the PME#. The options are On and
Off .
PS2 KB/MS Wake Up
Select Enable to “wake your system up” from the S1 and S3 state. The options
are Enabled and
Disabled .
USB Wake Up
Select Enable to “wake your system up” from the S1 and S3 state. The options
are Enabled and
Disabled
.
Power Loss Control
This setting allows you to choose how the system will react when power returns
after an unexpected loss of power. The options are Stay Off, Power On, and
Last State .
Legacy USB Support
Select Enabled to enable the functionality of the Legacy USB Support. The
options are Enabled and
Disabled .