Supero A+ Server 1022TC-IBQF, User Manual

Page: 65 / 108

Chapter 5: Advanced Motherboard Setup
5-17
Trusted Platform Module Header
The JTPM1 header is used to connect a
Trusted Platform Module (TPM), available
separately from a third-party vendor. A TPM
is a security device that allows encryption
and authentication of hard drives, disallowing
access if the TPM associated with it is not
installed in the system. See the table on the
right for pin definitions.
Trusted Platform Module Header
Pin Definitions (JTPM1)
Pin# Definition Pin# Definition
1 LCLK 2 GND
3 LFRAME 4 No Pin
5 LRESET 6 VCC5
7 LAD3 8 LAD2
9 VCC3 10 LAD1
11 LAD0 12 GND
13 RSV0 14 RSV1
15 SB3V 16 SERIRQ
17 GND 18 CLKRUN
19 LPCPD 20 RSV2
IPMB
A System Management Bus header for the
IPMI slot is located at IPMB. Connect the
appropriate cable here to use the IPMB I2C
connection on your system.
IPMB
Pin Definitions
Pin# Definition
1 Data
2 Ground
3 Clock
4 No Connection
Universal Serial Bus Ports
Two Universal Serial Bus ports (USB 2.0)
are located beside the COM1 port (USB0/1).
See the table on the right for pin definitions.
Universal Serial Bus Ports
Pin Definitions (USB 0/1)
USB0
Pin # Definition
USB1
Pin # Definition
1 +5V 1 +5V
2 PO- 2 PO-
3 PO+ 3 PO+
4 Ground 4 Ground
Power SMB (I
2
C)
The Power System Management Bus (I
2
C)
connector (JPI2C1) monitors the power
suppply, fan and system temperatures. See
the table on the right for pin definitions.
Power SMB I
2
C
Pin Definitions
(JPI2C1)
Pin# Definition
1 Clock
2 Data
3 PWR Fail
4 Ground
5 +3.3V