Supero A+ Server 1022TC-IBQF, User Manual

Page: 69 / 108

Chapter 5: Advanced Motherboard Setup
5-21
Watch Dog Enable/Disable
JWD1 enables the Watch Dog function, a
system monitor that takes action when a
software application freezes the system.
Jumping pins 1-2 will have WD reboot the
system if a program freezes. Jumping pins
2-3 will generate a non-maskable interrupt for
the program that has frozen. See the table
on the right for jumper settings. Watch Dog
must also be enabled in BIOS.
Note: When Watch Dog is enabled,
the user must write their own
application software to disable the
Watch Dog Timer.
Watch Dog
Jumper Settings (JWD1)
Jumper Setting Definition
Pins 1-2 Reset
Pins 2-3 NMI
Open Disabled