background image

S e n d   d o c u m e n t a t i o n   c o m m e n t s   t o   m d s f e e d b a c k - d o c @ c i s c o . c o m

Americas Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA

Cisco MDS 9000 Family Release Notes 
for Cisco MDS NX-OS Release 5.2(2)

Release Date: January 23, 2012

Part Number: OL-25090-02 F0

This document describes the caveats and limitations for switches in the Cisco MDS 9000 Family. Use 
this document in conjunction with documents listed in the 

“Related Documentation” section on page 41

.

Release notes are sometimes updated with new information on restrictions and caveats. Refer to the 
following website for the most recent version of the 

Cisco MDS 9000 Family Release Notes

http://www.cisco.com/en/US/products/ps5989/prod_release_notes_list.html

Table 1

 shows the on-line change history for this document.

Contents 

This document includes the following:

Introduction, page 2

Table 1

Online History Change

Revision

Date

Description

A0

January 23, 2012

Created the Cisco MDS NX-OS Release 5.2(2) release notes.

B0

January 25, 2012

Removed IVR from the 

“Features Not Supported on the 

Cisco MDS 9148 Switch”

 section. 

Added resolved caveat 

CSCtx32991

.

C0

January 26, 2012

Updated the 

“XRC Acceleration License”

 section.

D0

February 3, 2012

Added Resolved Caveat 

CSCts21095

.

E0

February, 8, 2012

Updated the 

“New Software Features in Cisco MDS NX-OS 

Release 5.2(2)”

 section: removed FIPS certification for SME 

and added IOA with NPV.

F0

March 8, 2012

Updated the upgrade path in 

Table 11

.

Summary of Contents for Cisco MDS 8/24c













































Reviews: