background image

S e n d   d o c u m e n t a t i o n   c o m m e n t s   t o   m d s f e e d b a c k - d o c @ c i s c o . c o m

Americas Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA

Cisco MDS 9000 Family Release Notes 
for Cisco MDS NX-OS Release 5.2(1)

Release Date: July 17, 2011 

Part Number: OL-25090-01

This document describes the caveats and limitations for switches in the Cisco MDS 9000 Family. Use 
this document in conjunction with documents listed in the 

“Related Documentation” section on page 42

.

Release notes are sometimes updated with new information on restrictions and caveats. Refer to the 
following website for the most recent version of the 

Cisco MDS 9000 Family Release Notes

http://www.cisco.com/en/US/products/ps5989/prod_release_notes_list.html

Contents 

This document includes the following:

Introduction, page 2

Components Supported, page 2

MDS 9000 Chassis and Module Support, page 7

Software Download Process, page 11

Upgrading Your Cisco MDS NX-OS Software Image, page 13

Downgrading Your Cisco MDS SAN-OS Software Image, page 18

New Features in Cisco MDS NX-OS Release 5.2(1), page 21

Licensed Cisco NX-OS Software Packages, page 22

Deprecated Features, page 24

Limitations and Restrictions, page 25

Caveats, page 31

Related Documentation, page 42

Obtaining Documentation and Submitting a Service Request, page 44

Summary of Contents for Cisco MDS 8/12c













































Reviews: