Chapter 7: BIOS
7-1
Chapter 7
BIOS
7-1 Introduction
This chapter describes the AMIBIOS™ Setup utility for the H8DCT-F/IBQF
serverboard. The 16 Mb AMI BIOS® is stored in a flash chip and can be easily
upgraded using a floppy disk-based program.
Note:
Due to periodic changes to the BIOS, some settings may have been added
or deleted and might not yet be recorded in this manual. Please refer to the Manual
Download area of our web site for any changes to BIOS that may not be reflected
in this manual.
Starting the Setup Utility
To enter the BIOS Setup Utility, hit the <Delete> key while the system is booting-up.
(In most cases, the <Delete> key is used to invoke the BIOS setup screen. There
are a few cases when other keys are used, such as <F1>, <F2>, etc.) Each main
BIOS menu option is described in this manual.
The Main BIOS screen has two main frames. The left frame displays all the options
that can be configured. “Grayed-out” options cannot be configured. The right frame
displays the key legend. Above the key legend is an area reserved for a text
message. When an option is selected in the left frame, it is highlighted in white. Often
a text message will accompany it. (Note that BIOS has default text messages built
in. We retain the option to include, omit, or change any of these text messages.)
Settings printed in
Bold
are the default values.
A "
"
indicates a submenu. Highlighting such an item and pressing the <Enter>
key will open the list of settings within that submenu.
The BIOS setup utility uses a key-based navigation system called hot keys. Most
of these hot keys (<F1>, <F10>, <Enter>, <ESC>, <Arrow> keys, etc.) can be used
at any time during the setup navigation process.
Summary of Contents for A+ Server 1022TC-IBQF
Page 1: ... SUPER USER S MANUAL Revision 1 0d A SERVER 1022TC IBQF 1022TC TF ...
Page 14: ...1 6 A Server 1022TC IBQF 1022TC TF User s Manual Notes ...
Page 48: ...4 20 A Server 1022TC IBQF 1022TC TF User s Manual Notes ...
Page 104: ...A 2 A Server 1022TC IBQF 1022TC TF User s Manual Notes ...