Chapter 5: Advanced Motherboard Setup
5-5
5-5 Processor and Heatsink Installation
Caution:
Exercise extreme caution when handling and installing the processor. Always
connect the power cord last and always remove it before adding, removing or changing
any hardware components.
Installation Procedure
Follow the procedures as listed below to install the motherboard into a chassis.
1. Install the processor(s) and the heatsink(s).
2. Install the motherboard in the chassis.
3. Install the memory and add-on cards.
4. Finally, connect the cables and install the drivers.
Installing the Processors
1. Begin by removing the cover
plate that protects the CPU. Lift
the lever on the CPU socket
until it points straight up. With
the lever raised, lift open the
silver CPU retention plate.
Triangles
2. Use your thumb and your index
finger to hold the CPU. Locate
and align pin 1 of the CPU
socket with pin 1 of the CPU.
Both are marked with a triangle.
Summary of Contents for A+ Server 1022TC-IBQF
Page 1: ... SUPER USER S MANUAL Revision 1 0d A SERVER 1022TC IBQF 1022TC TF ...
Page 14: ...1 6 A Server 1022TC IBQF 1022TC TF User s Manual Notes ...
Page 48: ...4 20 A Server 1022TC IBQF 1022TC TF User s Manual Notes ...
Page 104: ...A 2 A Server 1022TC IBQF 1022TC TF User s Manual Notes ...