Supero A+ 122TG-H6IBQRF, User Manual

Page: 68 / 118

5-18
A+ SERVER 2122TG-H6IBQRF/H6RF USER'S MANUAL
5-10 Onboard Indicators
LAN LEDs
The Ethernet ports (located beside the VGA
port) have two LEDs. On each Gb LAN port,
one LED blinks to indicate activity while the
other may be green, amber or off to indicate
the speed of the connection. See the table
on the right for the functions associated with
the connection speed LED.
Dedicated IPMI LAN LEDs
A dedicated IPMI LAN is also included on
the H8DGT-HLIBQF/HLF serverboard. The
amber LED on the right of the IPMI LAN
port indicates activity, while the green
LED on the left indicates the speed of the
connection. See the table at right for more
information.
IPMI LAN Link LED
(Left) & Activity LED (Right)
Color Status Definition
Link
(Left)
Green:
Solid
100 Mb/s
Activity
(Right)
Amber:
Blinking
Active
Power LED
DP2 is an Onboard Power LED. When
this LED is lit, it means power is present
on the serverboard. Be sure to turn off the
system and unplug the power cord(s) before
removing or installing components.
Power LED
(DP2)
State System Status
On Standby power present
on motherboard
Off No power connected
IPMI LED
The serverboard contains an IPMI LED
(DP1) located near the corner above the
PCI-X slots. When this LED is lit, it means a
connection is active for the built-in IPMI on
the serverboard.
Note: This LED is not installed on non-IPMI
boards.
IPMI LED (DP1)
State System Status
On Active connection
Off No connection
LAN LED
(Connection Speed
Indicator)
LED Color Definition
Off 10 MHz
Green 100 MHz
Amber 1 GHz