Supero A+ 122TG-H6IBQRF, User Manual

Page: 95 / 118

Chapter 6: Advanced Chassis Setup
6-19
6-10 Power Supply
The SC217 chassis includes a 1620 watt power supply. It automatically senses and
operates at the proper voltage between 100v to 240v. An amber light on the power
supply is illuminated when the system power is off. A green light indicates that the
power supply is operating.
Power Supply Replacement
The SC217 chassis utilizes two redundant power supplies. In the unlikely event that
the power supply unit needs to be replaced, one power supply can be removed,
without powering down the system. Replacement units can be ordered directly from
Supermicro (See the contact information in the Preface of this manual).
Changing the Power Supply
1. Push the release tab (on the back of the power supply) as illustrated.
2. Pull the power supply out using the handle provided.
3. Push the new power supply module into the power bay until it clicks into the
locked position.
Figure 6-18. Changing the Power Supply
Release Tab