Supero 6016T-6RFT User Manual Download

Page: 78 / 108

7-6

UPER

ERVER 6016T-6RFT+/6016T-6RF+ User's Manual

Cache L2

•

: This item displays the size of Cache L2 of the CPU for the moth-

erboard.

Cache L3

•

: This item displays the size of Cache L3 of the CPU for the moth-

erboard.

Ratio Status

•

: This item displays the status of the CPU ratio.

Ratio Actual Value

•

: This item displays the actual value of the CPU ratio.

CPU Ratio

Select Manual to manually confi gure the CPU Ratio. Select Auto to allow the BIOS

to automatically confi gure the CPU Ratio. The options are

Auto

and Manual.

Clock Spread Spectrum

Select Enable to enable Clock Spectrum support to allow the BIOS to monitor and

attempt to reduce the level of Electromagnetic Interference caused by the compo-

nents whenever needed. The options are

Disabled

and Enabled.

Hardware Prefetcher (Available when supported by the CPU)

If set to Enabled, the hardware prefetcher will prefetch streams of data and instruc-

tions from the main memory to L2 cache in the forward or backward manner to

improve CPU performance. The options are Disabled and

Enabled

Adjacent Cache Line Prefetch (Available when supported by the CPU)

The CPU prefetches the cache line for 64 bytes if this option is set to Disabled. If

this feature is set to Enabled, the CPU prefetches both cache lines for 128 bytes

as comprised. The options are Disabled and

Enabled

MPS and ACPI MADT Ordering

This feature allows the user to confi gure the MPS (Multi-Processor Specifi ca-

tions) and ACPI (Advanced Confi guration and Power Interface) settings for your

motherboard. Select Modern Ordering if XP or a newer version of Windows OS

is used in the motherboard. Select Legacy Ordering if 2000 or an earlier version

is used. The options are

Modern Ordering

and Legacy Ordering.

Machine Checking Feature (Available when supported by the CPU.)

Select Enabled to use this feature which will allow the CPU to detect and report

hardware (machine) errors via a set of model-specifi c registers (MSRs). The options

are Disabled and

Enabled

Summary of Contents for 6016T-6RFT













































































































Search results

Summary of Contents for 6016T-6RFT

Reviews:

Related manuals for 6016T-6RFT

Brands by name

Popular brands

Supero 6016T-6RFT, User Manual

Search results

Summary of Contents for 6016T-6RFT

Reviews:

Related manuals for 6016T-6RFT

Brands by name

Popular brands