54
SuperServer 7088B-TR4FT User's Manual
TPM Support Enable/Disable
Jumper Settings
Jumper Setting
Definition
Pins 1-2
Enabled
Pins 2-3
Disabled
TPM Support Enable/Disable
Use JPT1 to enable TPM (Trusted Platform Modules) support, which enhances data integrity
and system security. The default setting is Enabled.
Note:
For more information on configuring IPMI,
refer to the WPCM 450 IPMI BMC User's
Guide posted on our website at http://www.supermicro.com.
Watch Dog
JWD controls the Watch Dog function. Watch Dog is a monitor that can reboot the system
when a software application hangs. Jumping pins 1-2 will cause Watch Dog to reset the system
if an application hangs. Jumping pins 2-3 will generate a non-maskable interrupt signal for the
application that hangs. Watch Dog must also be enabled in BIOS. The default setting is Reset.
Note:
When Watch Dog is enabled, the user needs to write their own application software
to disable it.
Watch Dog
Jumper Settings
Jumper Setting
Definition
Pins 1-2
Reset
Pins 2-3
NMI
Open
Disabled
