SuperServer 7088B-TR4FT User's Manual
78
Onboard Video OPROM
Use this item to select the type of device installed on the onboard video port that will
be used for system boot. The options are Disabled, EFI, and
Legacy
.
VGA Priority
Use this item to select the graphics adapter to be used as the primary boot device.
The options are
Auto
, Onboard, and Offboard.
PCIe Hotplug Control
If this item is set Enabled, the user will be able to change a PCI-E device without shut-
ting down the system. The options are
Enabled
and Disabled.
Load Onboard LAN1 Option ROM/Load Onboard LAN2 Option ROM
Select Enabled to enable the onboard LAN1/LAN2 Option ROM which will allow the
user to boot the computer using a network device. The default setting for LAN1 Option
ROM is PXE, and the default setting for LAN2 Option ROM is Disabled.
Network Stack
Select Enabled to enable PXE (Preboot Execution Environment) or UEFI (Unified Ex
-
tensible Firmware Interface) for network stack support. The options are Enabled and
Disabled
.
ACPI Settings
WHEA Support
Select Enabled to support the Windows Hardware Error Architecture (WHEA) platform
and provide a common infrastructure for the system to handle hardware errors within the
Windows OS environment to reduce system crashes and to enhance system recovery
and health monitoring. The options are Enabled and Disabled.
Lock Legacy Resources
Select Enabled for locking legacy-resources support . The options are Enabled and
Disabled.
