SuperServer 7088B-TR4FT User's Manual
30
6. With the CPU in the socket, inspect the four corners of the CPU to make sure that the
CPU is properly installed.
7.
With the CPU properly installed, close the load plate, then lock the 'Close 1st' lever first,
followed by the 'Open 1st' lever. Gently push the load levers down until they lock.
Installing a Heatsink
A passive type heatsink is used on the CPU Board.
Note:
Do not apply any thermal grease to the heatsink or the CPU die; the required amount
has already been applied.
Keys (circled)
Note:
The CPU installs in the socket in one direction only. Make sure that it's properly inserted
into the CPU socket before closing the load plate. If it doesn't close properly, do not force it
as it may damage the CPU. Instead, open the load plate again to make sure that the CPU
is aligned properly.
OPEN 1st
OPEN 1st
'Close 1st' Lever
'Open 1st' Lever
Lever Locked
