SuperServer 7088B-TR4FT User's Manual
44
Internal Hard Drives
The two storage modules in the 7088B-TR4FT also support up to six 3.5" or twenty 2.5" fixed
HDDs. Installing or removing these drives requires the module to be removed from the chassis.
Removing a Storage Module
1. Begin by removing power from the system as described in Section 3-1.
2. Each release lever on the module has a locking latch. Push both latches to unlock the
levers.
3. Grasp the release levers on both ends of the module and pull outward as shown below.
4. The module should disengage, allowing you to pull it completely out of the chassis.
5.
Put the module on a flat, non-conductive surface before removing or installling the
internal hard drives.
Figure 3-14. Removing a Storage Module
2
2
3
3
4
