Supermicro SUPERSERVER 6016T-NTRF4+, User Manual

Page: 96 / 122

7-8
S
UPER
S
ERVER 6016T-URF4+/6016T-NTRF4+ User's Manual

Advanced Chipset Control
The items included in the Advanced Settings submenu are listed below:

CPU Bridge Confi guration
This feature allows the user to confi gure CPU Bridge settings. The items included
in the submenu are listed below.
•
CPU Revision: This item displays the CPU revision number.
•
Current QPI Frequency: This item displays the current QPI frequency.
•
Current CPU 1 Memory Frequency: This item displays the current CPU 1
memory frequency.
•
Current CPU 2 Memory Frequency: This item displays the current CPU 2
memory frequency.
•
Memory Reference Code: This item displays the memory reference code for
the motherboard.
•
QPI Reference Code: This item displays the QPI reference code for the moth-
erboard.
QPI (Quick Path Interconnect) Links Speed
QuickPath Interconnect (QPI) is the connection between the CPU and the mother-
board's I/O hub. Use this feature to modify data transfer speed for QPI Link con-
nections. The options are Slow-Mode, and Full Speed .
QPI Frequency (Available if the item - QPI Link Speed is set to Full Speed)
This feature allows the user to select the desired QPI frequency. The options are
Auto , 4.800 GT, 5.866GT, 6.400 GT.
QPI L0s and L1
This feature allows the user to set the QPI power state to a low setting. L0s and
L1 are automatically selected by the motherboard. The options are Disabled and
Enabled.
Memory Frequency
This feature forces a DDR3 module to run at a frequency other than what the system
has detected. Select Force SPD (Serial Presence Detect) to force the module to run
at a frequency specifi ed on the SPD table. The available options are Auto , Force
DDR-800, Force DDR-1066, Force DDR-1333 and Force SPD.