Supermicro SUPERSERVER 6016T-NTRF4+, User Manual

Page: 11 / 122

1-3
Chapter 1: Introduction
Graphics Controller
The X8DTU-LN4F+ features an integrated Matrox G200eW graphics chip, which
includes 16 MB of DDR2 memory.
Other Features
Other onboard features that promote system health include onboard voltage moni-
tors, auto-switching voltage regulators, chassis and CPU overheat sensors, virus
protection and BIOS rescue.
1-3 Server Chassis Features
The 6016T-URF4+/6016T-NTRF4+ is built upon the SC819TQ-R700U chassis.
Details on the chassis and on servicing procedures can be found in Chapter 6.The
following is a general outline of the main features of the chassis.
System Power
The SC819TQ-R700U features a redundant 700W power supply consisting of two
power modules. The system does not need to be shut down when replacing or
removing a single power supply module.
SAS/SATA Subsystem
The SC819TQ-R700U chassis was designed to support four hot-swap SAS/SATA
hard drives.
PCI Expansion Slots
Two riser cards are included. The RSC-R1UU-E8R+ is located on the right side of
the chassis and supports one low-profi le (5.5" length) PCI-E x8 card. The RSC-
R1UU-UE16 is located on the left side of the chassis and supports one UIO card and
one PCI-E x16 add-on card. See our web site for details (http://www.supermicro.
com/products/nfo/UIO.cfm). See section 5-6 of this manual for details.
Front Control Panel
The chassis' control panel provides you with system monitoring and control. LEDs
indicate system power, HDD activity, network activity (2), overheat/fan/power failure
and UID (Unit Identifi er). A main power button and a UID button is also included.