Supermicro SUPERSERVER 6015V-MR, User Manual

Page: 64 / 114

6-4
S
UPER
S
ERVER 6015V-MR/6015V-MRLP User's Manual
6-4 Drive Bay Installation/Removal
Accessing the Drive Bays
DVD-ROM/Serial ATA Drives: For installing or removing the DVD-ROM or Serial
ATA drive, you will need to gain access to the inside of the server by removing
the top cover of the chassis. Note: Only a "slim" DVD-ROM will fi t in the 6015V-
MR/6015V-MRLP.
Serial ATA Drive Installation
The SATA drive is not hot-swappable, meaning system power must be turned off
before installing or removing.
To install or remove the drive, fi rst power down the system and then remove the
top cover of the chassis as described on page 6-7. Unscrew the retention screw
at the top center of the drive, then push the drive tray out from the back until you
can grasp and pull it out through the front of the chassis. Remove the drive from
the drive tray.
Figure 6-2. System Cooling Fans (6015V-MR shown)