Supermicro SUPERSERVER 6015V-MR, User Manual

Page: 24 / 114

2-8
S
UPER
S
ERVER 6015V-MR/6015V-MRLP User's Manual
Figure 2-4. Installing the Server into a Telco Rack
2-5 Checking the Serverboard Setup
After you install the 6015V-MR/6015V-MRLP in the rack, you will need to open the
unit to make sure the serverboard is properly installed and all the connections have
been made.
1. Accessing the inside of the server (Figure 2-6)
First, release the retention screws that secure the unit to the rack. Grasp the two
handles on either side and pull the unit straight out until it locks (you will hear
a "click"). Then, remove the screws from the rear lip of the chassis top cover
(see Figure 2-5 for location). Next, release the top cover by pushing the cover