Supermicro SUPERSERVER 6015V-MR, User Manual

Page: 12 / 114

1-2
S
UPER
S
ERVER 6015V-MR/6015V-MRLP User's Manual
1-2 Serverboard Features
At the heart of the SuperServer 6015V-MR/6015V-MRLP lies the X7DVL-E, a dual
processor serverboard based upon Intel's 5000V chipset. Below are the main
features of the X7DVL-E.
Processor
The X7DVL-E has two LGA 771-pin sockets to support two Dual-Core Intel Xeon
5100/5000 series processors. Please refer to the support section of our web site for
a complete listing of supported processors (http://www.supermicro.com/support/).
Memory
The X7DVL-E has six (6) 240-pin DIMM sockets that can support up to 16 GB
of ECC FBD (Fully Buffered DIMM) DDR2-667/533 SDRAM. The X7DVL-E's
dual-channel memory bus requires modules to be populated in pairs. All memory
modules must be the same size and speed.
Serial ATA
A Serial ATA controller is incorporated into the ESB2 (South Bridge) portion of the
5000V chipset. One internal SATA hard drive is supported in the 6015V-MR/6015V-
MRLP.
PCI Expansion Slots
The X7DVL-E has one x8 PCI-Express slot, one x4 PCI-Express x4 slot, two 64-bit
133/100 MHz PCI-X slots and two 32-bit PCI slots. One riser card is included with
the system to support a single add-on card in a 64-bit 133/100 MHz PCI slot (see
Chapter 5 for details).
Ethernet Ports
An Ethernet controller is integrated into the ESB2 to support two Gigabit LAN
(Ethernet) ports.
Onboard Controllers/Ports
An onboard IDE controller supports one fl oppy drive and up to four Ultra ATA 100
hard drives or ATAPI devices. Onboard I/O backpanel ports include one COM port,