Supermicro SUPERSERVER 6015V-M3, User Manual

Page: 12 / 122

1-2
S
UPER
S
ERVER 6015V-M3/6015V-MT User's Manual
1-2 Serverboard Features
At the heart of the SuperServer 6015V-M3/6015V-MT lies the X7DVL-3/X7DVL-i,
a single processor serverboard based on Intel's 5000V chipset and designed to
provide maximum performance. Below are the main features of the X7DVL-3/
X7DVL-i.
Processors
The X7DVL-3/X7DVL-i supports dual Intel
®
5100 Series processors in LGA771
sockets. Please refer to our web site for a complete listing of supported processors
(www.supermicro.com).
Memory
The X7DVL-3/X7DVL-i has six 240-pin DIMM sockets that can support up to 24
GB of ECC FBD (Fully Buffered DIMM) DDR2-667/533 SDRAM. Memory can be
installed in both interleaved (dual-channel) and non-interleaved (single-channel)
confi gurations. All memory modules used to populate the system should be the
same size, type and speed.
Onboard SAS (6015V-M3)
An onboard LSI 1068E SAS controller in integrated into the X7DVL-3. The hot-
swappable SAS drives are connected to a backplane that provides power, bus
termination and confi guration settings.
Note: The operating system you use must have RAID support to enable the hot-
swap capability and RAID function of the SAS drives. RAID 0, 1, 5 and 10 are
supported.
Serial ATA
The South Bridge (ESB2) of the 5000V chipset includes a Serial ATA controller.
The hot-swappable SATA drives are connected to a backplane that provides power,
bus termination and confi guration settings.
Note: The operating system you use must have RAID support to enable the
hot-swap capability and RAID function of the SAS drives. RAID 0, 1, and 10 are
supported.