5-4
S
UPER
S
ERVER 6015V-M3/6015V-MT User's Manual
5-4 I/O
Ports
The I/O ports are color coded in conformance with the PC 99 specifi cation. See
Figure 5-2 below for the colors and locations of the various I/O ports.
Figure 5-1. Control Panel Header Pins
Note:
The COM2 port is a header on the serverboard, located near the fl oppy
connector at the corner of the serverboard. COM2 should be connected to the
COM port at the front of the chassis.
Mouse (Green)
LAN1 LAN2
Keyboard
(Purple)
COM1 Port (Turquoise)
VGA Port (Blue)
USB 0/1 Ports
Figure 5-2. I/O Ports
NMI
x (Key)
Vcc 5V Stby
Vcc 3V
Vcc 3V Stby
Vcc 3V Stby
Vcc 3V
Reserved
Reset (Button)
Power (Button)
Ground
x (Key)
Power On LED
IDE/SATA LED
NIC1 LED
NIC2 LED
OH/Fan Fail LED
Reserved
Ground
Ground
2 1
20 19
Connecting the Control Panel
JF1 contains header pins for various front control panel connectors. See Figure
5-1 for the pin locations of the various front control panel buttons and LED indica-
tors. All JF1 wires have been bundled into a single ribbon cable to simplify this
connection. Make sure the red wire plugs into pin 1 as marked on the board. The
other end connects to the Control Panel PCB board, located just behind the system
status LEDs on the chassis.
Summary of Contents for SUPERSERVER 6015V-M3
