Supermicro SUPERSERVER 6015V-M3, User Manual

Page: 46 / 122

5-12
S
UPER
S
ERVER 6015V-M3/6015V-MT User's Manual
Reset Connector
The reset connector is located on pins
3 and 4 of JF1 and attaches to the
reset switch on the computer chas-
sis. See the table on the right for pin
defi nitions.
PW_ON Connector
The PW_ON connector is on pins 1
and 2 of JF1. This header should
be connected to the chassis power
button. See the table on the right for
pin defi nitions.
5-9 Connector
Defi nitions
ATX Power Connector
The primary power supply connec-
tor (JPW1) on the X7DVL-3/X7DVL-i
meets the SSI (Superset ATX) 24-pin
specifi cation. Refer to the table on the
right for the pin defi nitions of the ATX
24-pin power connector. You must
also connect the 4-pin (PW2) proces-
sor power connector to your power
supply. Refer to the table below right
for the PW2 (12V) connector.
Important : you must also connect
JPW3 to your power supply.
Required Connection
ATX Power 24-pin Connector
Pin Defi nitions (JPW1)
Pin# Defi nition Pin # Defi nition
13 +3.3V 1 +3.3V
14 -12V 2 +3.3V
15 COM 3 COM
16 PS_ON 4 +5V
17 COM 5 COM
18 COM 6 +5V
19 COM 7 COM
20 Res (NC) 8 PWR_OK
21 +5V 9 5VSB
22 +5V 10 +12V
23 +5V 11 +12V
24 COM 12 +3.3V
Reset Button
Pin Defi nitions (JF1)
Pin# Defi nition
3 Reset
4 Ground
Power Button
Pin Defi nitions (JF1)
Pin# Defi nition
1 PW_ON
2 Ground
Processor Power Connector
In addition to JPW1, the 12V 8-
pin processor power connector at
JPW3 must be connected to your
serverboard. See the table on the right
for pin defi nitions.
Processor Power
Connector
Pin Defi nitions
Pins Defi nition
1 through 4 Ground
5 through 8 +12V