Supermicro SUPERSERVER 6015V-M3, User Manual

Page: 50 / 122

5-16
S
UPER
S
ERVER 6015V-M3/6015V-MT User's Manual
Wake-On-Ring
The Wake-On-Ring header is designated
JWOR. This function allows your computer
to receive and be "awakened" by an incom-
ing call when in the suspend state. See the
table on the right for pin defi nitions. You
must also have a WOR card and cable to
use this feature.
Serial Ports
Two serial ports are included on the
serverboard: COM1 is a port located
beside the USB ports and COM2 is a
header located near the fl oppy con-
nector. See the table on the right for
pin defi nitions.
Wake-On-Ring
Pin Defi nitions
(JWOR)
Pin# Defi nition
1 Ground (Black)
2 Wake-up
Note: Pin 10 is included on the header but not on
the port. NC indicates no connection.
Serial Port Pin Defi nitions
(COM1/COM2)
Pin # Defi nition Pin # Defi nition
1 DCD 6 DSR
2 RXD 7 RTS
3 TXD 8 CTS
4 DTR 9 RI
5 Ground 10 NC
Alarm Reset
If redundant power supplies are
installed and the Power Supply Fail
Detect jumper (JPWF) is enabled, the
system will notify you when a power
module fails. Connect JAR to a micro-
switch to enable you to turn off the
power fail alarm. See the table on the
right for pin defi nitions.
Note: this is not needed on the 6015V-
M3/6015V-MT server, which has a
single power supply.
Alarm Reset Pin Defi nitions
(JAR)
Pin Setting Defi nition
Pin 1 Ground
Pin 2 +5V