10
SuperServer 5019A-FTN10P User's Manual
Figure 1-1. Control Panel View
1.4 Server Chassis Features
Control Panel
The switches and LEDs located on the control panel are described below. The control panel
is located next to the left handle of the chassis. See Chapter 4 for details on the control panel
connections.
1
7
6
5
4
3
2
Control Panel Features
Item
Feature
Description
1
Power Button
The main power button is used to apply or remove power from the
power supply to the server. Turning off system power with this button
removes the main power but maintains standby power. To perform
maintenance tasks, you must also unplug the system before servicing.
2
Reset Button
The reset button is used to reboot the system.
3
Power LED
Indicates power is being supplied to the system power supply. This
LED should normally be illuminated when the system is operating.
4
HDD LED
Indicates hard drive activity when flashing.
5
NIC1 LED
Indicates network activity on LAN port 1 when flashing.
6
NIC2 LED
Indicates network activity on LAN port 2 when flashing.
7
Information LED
Indicates one of multiple conditions. Refer to the following table for
more information.
