Chapter 2: Server Installation
19
Warning:
Stability hazard. The rack stabilizing mechanism must be in place, or the
rack must be bolted to the floor before you slide the unit out for servicing. Failure to
stabilize the rack can cause the rack to tip over.
Figure 2-1. Installing the Chassis into a Rack
2.3 Installing the System into a Rack
This section provides information on installing the 505-203B chassis into a rack unit. Due to
the variety of rack units on the market, the assembly procedure might differ slightly. Also refer
to the installation instructions that came with the rack unit you are using.
Installing the Chassis into a Rack
The system can be directly installed into a rack using screws.
1. Gather the four mounting screws shipped with the system.
2. Align the mounting holes of the chassis with the through-holes of the rack.
3. Insert the mounting screws into the through-holes in the front of the chassis, and tighten
the screws until the chassis is secured to the rack.
