26
SuperServer 5019A-FTN10P User's Manual
Figure 3-6. Two 3.5" HDDs and No Expansion Card
Installing 3.5" Fixed Hard Drives
You can install one 3.5" HDD and a PCI-E expansion card, or you can install two 3.5" HDDs
and no expansion card.
Installing 3.5" Hard Drives
Begin by removing power from the system as described in Section 3.1 and removing the
cover as described in Section 3.2.
1. Place the hard drives into the chassis as illustrated in Figure 3-5 or Figure 3-6. Orient
the drives with the cable connections facing the rear of the chassis.
2.
Secure the drives to the chassis floor by inserting the screws upward through the
underside of the chassis.
3. Connect the drive wiring.
4. Reinstall the chassis cover and restore power to the server.
Figure 3-5. One 3.5" HDD and One Low-Profile Expansion Card
