Supermicro SUPERSERVER 5018D-MTLN4F, User Manual

Page: 68 / 120

5-22
S
UPER
S
ERVER 5018D-MTLN4F User's Manual
Management Engine (ME) Recovery
Use jumper JPME2 to select ME Firm-
ware Recovery mode, which will limit
resource allocation for essential system
operation only in order to maintain normal
power operation and management. In the
single operation mode, online upgrade
will be available via Recovery mode. See
the table on the right for jumper settings.
ME Recovery
Jumper Settings
Jumper Setting Definition
Pins 1-2 Normal (Default)
Pins 2-3 ME Recovery
Manufacturer Mode Select
Close pins 2 and 3 of jumper JPME1 to
bypass SPI flash security and force the
system to operate in the Manufacturer
mode, allowing the user to flash the sys-
tem firmware from a host server for sys-
tem setting modifications. See the table
on the right for jumper settings.
ME Mode Select
Jumper Settings
Jumper Setting Definition
Pins 1-2 Normal (Default)
Pins 2-3 Manufacture Mode
LAN Firmware Upgrade
Jumper Settings
Jumper Setting Definition
Shorted Enabled
Open Normal (Default)
LAN Firmware Upgrade
To upgrade the LAN firmware installed
on the motherboard, activate this jumper
to allow the firmware to be erased and
written over. Warning: this process is
irreversible.