Supermicro SUPERSERVER 5018D-MTLN4F, User Manual

Page: 59 / 120

Chapter 5: Advanced Motherboard Setup
5-13
Connector Description
Fan A,
Fan1~Fan4
System/CPU Fan Headers (Fan A: CPU Fan)
JL1 Chassis Intrusion Header
JPW1 24-pin ATX Main Power Connector (Required)
JPW2 +12V 8-pin CPU power Connector (Required)
JSD1 SATA DOM (Device On Module) Power Connector
JSTBY1 Standby Power Header
JTPM1 Trusted Platform Module/Port 80 Connector
SP1 Internal Speaker/Buzzer
I-SATA 0~5 Serial ATA Ports 0~3 (SATA 3.0), Ports 4/5 (SATA 2.0)
T-SGPIO 1/2 Serial Link General Purpose I/O Headers
USB8/9, 12/13 Front Panel USB 2.0 Headers
USB1 Front Panel USB 3.0 Header
USB0 Type A USB 3.0 Connector
JPI2C1 Power Supply SMBbus I2C Header
JF1 Control Panel Header
J31 Active LED Header for LAN4
J32 Active LED HEader for LAN3
JLED1 Onboard Power LED Header
Jumper Description Default Setting
JBR1 BIOS Recovery Pins 1-2 (Normal)
JBT1 CMOS Clear See Section 5-9
JI
2
C1/JI
2
C2 SMB to PCI Slots Off (Disabled)
JPL1/JPL2 LAN1/LAN2 Enable/Disable Pins 1-2 (Enabled)
JPL3/JPL4 LAN3/LAN4 Enable/Disable Pins 1-2 (Enabled)
JPME1 Management Engine (ME) Recovery Pins 1-2 (Normal)
JPME2 Management Engine (ME) Mode Select Pins 1-2 (Normal)
JWD1 Watch Dog Pins 2-3 (NMI)
JPB1 BMC Enable/Disable Pins 1-2 (Enabled)
JPG1 VGA Enable/Disable Pins 1-2 (Enabled)
J21 LAN Firmware Update Jumper Open (Disabled)