53
Chapter 3: Maintenance and Component Installation
Figure 3-8. Removing a Drive Carrier
1
2
2
Installing a 2.5" NVMe Drive
1.
Place the NVMe drive carrier on a flat surface.
2. Orient the drive with the connector facing the bottom rear of the carrier. The drive can
be inserted from above the carrier and into the clips until a "click" is heard.
3. Use the open handle of the drive carrier to insert the carrier into the open drive bay.
4. Secure the drive carrier into the drive bay by closing the drive carrier handle.
5.
Lock the handle with a flat-head screwdriver.
