12
Chapter 1: Introduction
Control Panel Features
Feature
Description
Power button
The main power switch applies or removes primary power from the power supply to the server
but maintains standby power.
Information LED Alerts operator to several states, as noted in the table below.
NIC (LAN) LED
Indicates network activity on the LAN port when flashing.
UID LED
The unit identification (UID) LED turns on when activated by the UID button or via
management software.
UID button
UID button, to activate UID LEDs for easier location of the server in a rack environment.
BMC Reset
BMC reset button
USB
Two USB3.0 ports
BMC LAN
Dedicated BMC LAN port
VGA
VGA port
Information LED
Status
Description
Continuously on and
red
An overheat condition has occurred.
(This may be caused by cable congestion.)
Blinking red (1Hz)
Fan failure, check for an inoperative fan.
Blinking red (0.25Hz)
Power failure, check for a non-operational power
supply.
Solid blue
UID has been activated locally to locate the
server in a rack environment.
Blinking blue
UID has been activated remotely to locate the
server in a rack environment.
Control Panel
Figure 1-2. Control Panel
Power
Information LED
BMC Reset Button
UID LED
UID Button
USB
VGA
BMC LAN
NIC (LAN) LED
