6-5
Chapter 6: Rack Installation
Removing the Top Cover
1. Power down the system and remove the power cords from the rear of the
power supplies. Open the chassis cover as described in Section 5-3.
2. Locate the chassis cover lock (blue lever) at the rear of the chassis cover.
3. Slide the chassis cover lock to the right and push chassis cover forward.
4. Lift the chassis top cover off the chassis.
Removing the Chassis Feet
1. Power down the system and remove the power cords from the rear of the
power supplies. Open the chassis cover as described in Section 5-3.
2. Place the chassis on its side with the chassis side cover facing upward.
3. Remove the screw holding the chassis foot in place.
4. The foot lock is a tab located in the center of the foot that prevents the foot
from sliding. -Using a flat head screwdriver, gently lift the foot lock upward
and slide the foot toward the rear of the chassis.
5. Repeat steps 2 and 3 with each remaining foot.
