5-11
Chapter 5: Chassis Setup and Maintenance
Peripheral
Drive Tray
Release Tabs
The SC745 chassis accepts an M35TQ mobile rack to install extra hot-swappable
hard drives. The mobile rack goes into the storage module which goes into the
chassis.
For more information on mobile racks, visit the Supermicro Web site at www.
supermicro.com.
Adding Five Hard Drives Using A Supermicro Mobile Rack
1. Power down the system and remove the power cords from the rear of the
power supplies. Open the chassis cover as described in Section 5-3.
2. Locate the peripheral drive tray release tabs.
3.
Pull the first drive release tab and push the drive tray toward the front of the
chassis. Repeat this for all three tabs.
Figure 5-11: Remove the Peripheral Drive Tray