SC745 Chassis Manual
5-14
Figure 5-15: Remove Dummy Drive Tray
6. Secure the hard drive to the tray using four screws.
7. Insert the hard drive into the chassis using the following steps:
7a. Press the hard drive release button to extend the drive tray handle.
7b. Insert the hard drive into the chassis and close the handle to lock the
hard drive into place.
Figure 5-16: Install Hard Drive
Drive Tray
4. Remove the screws holding the drive tray to the dummy drive.
5. Place a hard drive in the drive tray.
SAS/SATA
Hard Drive
