Supermicro A+ User Manual Download | Manualshive

Page: 97 / 130

background image

Chapter 4: UEFI BIOS

97

When SEL is Full

This feature allows the user to decide what the BIOS should do when the system event log
is full. Select Erase Immediately to erase all events in the log when the system event log is
full. The options include

Do Nothing

and Erase Immediately.



BMC Network Configuration

Update IPMI LAN Configuration

Select Yes for the BIOS to implement all IP/MAC address changes at the next system boot.
The options include

No

and Yes.

*If the item above set to Yes, the following item will become available for user's

configuration:

Configuration Address Source

This feature allows the user to select the source of the IP address for this computer. If Static
is selected, you will need to know the IP address of this computer and enter it to the system

manually in the field. If DHCP is selected, the BIOS will search for a DHCP (Dynamic Host
Configuration Protocol) server in the network that is attached to and request the next available

IP address for this computer. The options include Static and

DHCP

.

VLAN

This item configures the virtual LAN settings. The options include

Disabled

and Enabled.

IPv6 Support

Use this feature to enable IPv6 support. The options include Enabled and

Disabled

.

«
...
95
96
97
98
99
...
»

Summary of Contents for A+



































































































































Reviews:

No comments

Related manuals for A+

Brand: G-Technology Pages: 35

Brand: Patton electronics Pages: 331

NOP1840 PEP-Box

Brand: Newtec Pages: 96

Brand: AXIOMTEK Pages: 55

UniServer T1100 G3

Brand: H3C Pages: 138

Snap! Server 4000

Brand: Quantum Pages: 8

Brand: Avaya Pages: 84

8668 - Eserver xSeries 232

Brand: IBM Pages: 182

Thin Client 166

Brand: Tangent Pages: 2

eServer xSeries 205 Type 8480

Brand: IBM Pages: 168

Brand: Epson Pages: 28

EpsonNet 802.11b

Brand: Epson Pages: 30

Stylus C80WN - Ink Jet Printer

Brand: Epson Pages: 1

Brand: Epson Pages: 258

Brand: Epson Pages: 280

Lava DATATAP-IP

Brand: Lava Pages: 2

Brand: JIEYUN TECHNOLOGY Pages: 25

Brand: GRASS VALLEY Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands