47
Chapter 3: Maintenance and Component Installation
Figure 3-10. Installing Drive to Drive Carrier
Installing a 2.5" NVMe Drive
1.
Place the NVMe drive carrier on a flat surface.
2. Orient the drive with the connector facing the bottom rear of the carrier. The drive can
be inserted from above the carrier and into the clips until a "click" is heard.
3. Use the open handle of the drive carrier to insert the carrier into the open drive bay.
4. Secure the drive carrier into the drive bay by closing the drive carrier handle.
5.
Lock the handle with a flat-head screwdriver.
Removing a 2.5" NVMe Drive
1. After removing the carrier from the system, push up from the bottom of the drive to
remove it from the carrier.
2. Replace with a new drive and insert the carrier back into the open drive bay.
Push down until click
Summary of Contents for A+
Page 1: ...USER S MANUAL Revision 1 0b A Server AS 4124GO NART AS 4124GO NART ...
Page 14: ...14 A Server AS 4124GO NART AS 4124GO NART User s Manual Figure 1 6 Motherboard Block Diagram ...
Page 95: ...Chapter 4 UEFI BIOS 95 Save Changes and Exit Use this item to save the changes above and exit ...
