Supermicro A+ Page 91 User Manual Download

Page: 91 / 130

Chapter 4: UEFI BIOS

SATA Hotplug

This setting enables or disables the on chip SATA hot plug feature. The options are Disabled,
and

Enabled



SATA Information

This section displays information on the detected SATA devices:

•

SATA0 ~ SATA3



KMIP Server Configuration

KMIP Server IP address

KMIP TCP Port number

TimeZone

Clinet UserName

Client Password



CA Certificate

The options include Update, Delete, and Export.



Client Certificate

The options include Update, Delete, and Export.



Client Private Key

The options include Update, Delete, and Export.



HTTP Boot Configuration

HTTP Boot One Time

The default setting is Dsabled.

Input the description

Boot URI

A new Boot Option will be created according to this Boot URI. It is only supported on Dual
or EFI Boot Mode.

Summary of Contents for A+



































































































































Search results

Summary of Contents for A+

Reviews:

Related manuals for A+

Brands by name

Popular brands

Supermicro A+, User Manual

Search results

Summary of Contents for A+

Reviews:

Related manuals for A+

Brands by name

Popular brands