Supermicro A+ SERVER 1012C-MRF, User Manual

Page: 98 / 116

7-6
A+ SERVER 1012C-MRF USER'S MANUAL

DRAM Timing Configuration
DRAM Timing Config
This option allows you to set the DRAM timing configuration for the system.
Options include Auto or Manual.
Memory Clock Speed
This options sets the memory clock speed. Options include 200 Mhz,
266 Mhz, 333 Mhz, 400 Mhz, 533 Mhz, 667 Mhz, 800 Mhz and 933 Mhz.
IOMMU
This setting is used to enable or disable or set the GART size in systems without
AGP. Options include Enabled and
Disabled
.
OHCI/EHCI HC Device Functions
These settings allow you to either Enable or Disable functions for OHCI or EHCI
bus devices.
USB 2.0 Controller Mode
Use this setting to configure the USB 2.0 Controller in either Hi-Speed (480
Mps) or Full Speed (12 Mps) mode. Options include Enabled (Hi-Speed Mode)
or Disabled (Full Speed Mode).
Legacy USB Support
Select "Enabled" to enable the support for USB Legacy. Disable Legacy support if
there are no USB devices installed in the system. "Auto" disabled Legacy support
if no USB devices are connected. The options are Disabled, Enabled and
Auto .
Route Port 80h Cycles To
This option allows you to set route 80h cycles to either PCI or
LPC
.

IDE Configuration
Onboard PCI IDE Controller
This setting allows you to
Enable
or Disable the PCI IDE controller.
OnChip SATA Channel
This setting allows you to Enable or Disable the OnChip SATA channel.