Supermicro A+ SERVER 1012C-MRF, User Manual

Page: 12 / 116

1-2
A+ SERVER 1012C-MRF USER'S MANUAL
1-2 Serverboard Features
At the heart of the A+ Server 1012C-MRF is the H8SCM-F single processor
serverboard, which is based on the AMD SR5650/SP5100 chipset. Below are the
main features of the serverboard.
Processors
The H8SCM-F serverboard supports a single AMD Opteron 4000 (4300 ready)
series (AMD Socket C32 type) processor. Please refer to our web site for a complete
listing of supported processors (
www.supermicro.com ).
Memory
Each H8SCM-F serverboard has four (4) single and dual channel
DIMM slots support up to 32 GB of ECC/Non-ECC UDIMM or
up to 128 GB of ECC RDIMM DDR3-1600/1333/1066 Mhz Mhz speed,
1 GB, 2 GB, 4 GB, 8 GB, 16 GB or 32 GB size SDRAM in either 1.5V or 1.35V
voltages. See Chapter 5 Section 6 for more details on installing memory into the
system.
Serial ATA
The South Bridge (SP5100) of the chipset includes a Serial ATA controller for six
Gb/s SATA drives. The hot-swappable SATA drives are connected to a backplane
that provides power, bus termination and configuration settings. RAID 0, 1 and 10
are supported. Refer to the support area of our web site for procedures on setting
up RAID on your system.
PCI Expansion Slots
Each A+ Server 1012C-MRF has available one PCI-E 2.0 x8 (in a x16) slot.
Ethernet Ports
An Intel® network controller is integrated into each of the serverboards to support
two Gigabit LAN ports (100/1000Base-T/1000BaseTX, RJ45 output).
Onboard Controllers/Ports
Onboard I/O backpanel ports on each serverboard include one COM port, a VGA
port, two USB ports, a dedicated IPMI LAN port and two Gigabit LAN (NIC) ports.