Supermicro A+ SERVER 1012C-MRF, User Manual

Page: 20 / 116

2-4
A+ SERVER 1012C-MRF USER'S MANUAL
2-5 Installing the System into a Rack
This section provides information on installing the A+ Server 1012C-MRF into a
rack unit. If the system has already been mounted into a rack, you can skip ahead
to Sections 2-6 and 2-7.
Note: the server may be installed as is - rack hardware is optional.
Basic Installation Procedure
The 1012C-MRF server comes with two rack mounting brackets, which are located
on each side at the front of the chassis. To mount the system into a rack, simply
screw these brackets directly to the front of the rack (two screws for each bracket).
As Figure 2-1 shows, the brackets can be located at the front of the chassis (left
figure) or moved approximately one-third to the rear of the chassis (right figure).
Figure 2-1. Identifying the Sections of the Rack Rails