Superabrasive
Owner’s manual original language – Lavina
®
LP36
01/2020
26
Wipe the Zerk grease fitting to prevent abrasive material from entering
the fitting during lubrication.
Lubricate the Zerk grease fitting with 1-1 ½ shots of multipurpose grade
grease. Replace the Zerk grease-fitting cap when finished.
Repeat the those three steps for the remaining grease fittings on both
spider assemblies.
Pillow block bearings (Daily)
Remove the front cover and locate the Zerk grease fitting behind the
wheel (fig. 8.6.2).
Universal joint
Remove the front cover
and locate the Zerk
grease fittings on the
Universal joint.
Lubricate the Zerk
grease fittings 1 – 1 ½ of
multipurpose grade
grase.
Figure 8.6.2
