Superabrasive
Owner’s manual original language – Lavina
®
LP36
01/2020
8
STEERING
Dual control levers located in front of the operator's seat are provided for steering this
trowel. Push the left control lever forward and pull the right control lever backward and the
trowel will rotate clockwise on approximately a center axis. Pull the left control lever backward
and push the right control lever forward and the trowel will rotate counterclockwise.
CONTINUOUSLY VARIABLE TRANSMISSION (CVT)
A Continuously Variable Transmission (CVT) has been installed to obtain maximum drive
torque. This is accomplished by continually adjusting the drive ratio to obtain optimum torque
and speed during all phases of finishing from low speed/high torque to high speed burnishing.
HOW IT WORKS
As the engine RPMs increase, the drive clutch closes, forcing the belt to ride outwards on the
drive sheaves. The closing of the drive clutch also forces the belt to open the driven or secondary
sheaves. The opening and closing of these sheaves creates a ratio variation—hence CVT or
Continuously Variable Transmission.
WARNING!
The dust collector Lavina
®
LP36G is manufactured and fitted for the above-mentioned applications
only! Every other use may possess risks to the persons involved.
