Superabrasive
Owner’s manual original language – Lavina
®
LP36
01/2020
21
To change the blade pitch just rotate the levers (fig. 7.3.1). Make sure
that you make the same correction at both levers so the blade pitch is
equal on both heads. At figure 7.3.2 is shown suggested working pitch
according to different conditions of the concrete.
• When changing or setting the pitch (angle) of the trowel blades, slow the machine, set the
desired pitch on the left side of the machine, then adjust the right side to match.
• To increase the pitch, turn the pitch control inward (I). Use the pitch indicator (II) to adjust
pitch equally on both right and left trowel blades.
Figure 7.3.1
Figure 7.3.2
