Superabrasive
Owner’s manual original language – Lavina
®
LP36
01/2020
23
-
Ensure that all screws, bolts, and nuts are properly tightened.
-
Check the waste container level. Always clean and change the bag when the debris reaches a
maximum of 75% of its full capacity.
-
Check the flexible Trowel hose and accessories for significant wear or damage. If holes are
present, the dust collector’s efficiency will be reduced, and debris will leak into the work
environment.
IMPORTANT: All major repair work should be performed by Superabrasive or an authorized repair
facility.
Check the turbine belt tension.
Check and clean the Propane installation.
8.1 CHECK DAILY
After operating the LP36, the operator should conduct a visual inspection of the machine.
Any defect should be solved immediately. Pay attention to plugs and Trowel hoses, loose bolt or
screws.
8.2 CHECK AND REPLACE AFTER THE FIRST 8 WORKING HOURS
Replace the oil in the engine after the first 8 hours work, according to the instructions of the
engine manufacturer.
ALWAYS USE 30HD OR 10W30 ENGINE OIL WITH ALL OF THE FOLLOWING RATINGS: SF, SG, AND CC.
8.3 CHECK AND REPLACE EVERY 50 WORKING HOURS
Change engine oil, while changing check for leakage of engine oil at the various seals. The
hour meter will blink between 48-52 hours as a reminder/"Engine Oil Capacity" is 1.5L (1.6US.qt)
when oil filter is not removed and 1.7L (1.8US.qt) when oil filter is removed;
8.4 RECOMMENDED OIL CHANGE INTERVALS
Do not exceed the 50-hour oil change interval. Oil changes more frequent than 25 hours will
give even longer engine life. In any case, always use 30HD or 10W30 engine oil with all of the
following ratings: SF, SG, and CC. make sure the oil level is maintained at the "FULL" level.
