Superabrasive
Owner’s Manual Original Language – Lavina
®
32G-X/GTX
7/2019
28
Make sure the four bolts holding the adaptor
(Fig.8.7.12) are reliably tightened. Mount the
holder on the machine using the same socket
as in 8.6 (Fig.8.7.10; Fig.8.7.11). The retaining
washer fits into the central hole C of adaptor
and the four bolts into the thread holes
Т
(Fig.8.7.12). The holder is centered on the
outside diameter of the adaptor. Ensure the
holder is properly connected to the plate of the
adaptor and then tight evenly the four bolts.
Tightening force on the bolts has to be
22...25N.m(16...18 lbf.ft). Mounting the holder
without retaining washer (Fig.8.7.2) is
INADMISSIBLE
because the security system preventing the separation of part of
the holder in case of broken buffers and elastic element will not function! You can change the butterfly of the holder
without dismounting the holder of the machine.
Fig.8.7.13 is 3-d section view of the
holder,
showing
its
parts.
The
numbering is the same as in Spare
parts.
Figure 8.7.13
Figure 8.7.5
Figure 8.7.1
Figure 8.7.2
Figure 8.7.7
Figure 8.7.3
Figure 8.7.4
Figure 8.7.8
Figure 8.7.9
Figure 8.7.6
Figure 8.7.10
Figure 8.7.11
T
C
Figure 8.7.12
